Date: Fri, 28 Mar 2003 10:39:26 -0500
Reply-To: Robert Donalds <bostneng@FCL-US.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Robert Donalds <bostneng@FCL-US.NET>
Subject: Re: Oil pump size differences? Boston Bob Customers?
Content-Type: text/plain; charset="iso-8859-1"
Stan
thanks for your support but Roger wittmann did contact me first and he was
asking the right questions he wants the best engine for his van. His post
gave me a chance to make what I felt was some good points about oil pressure
and the perceived need for more oil pressure
Bob
----- Original Message -----
From: "Stan Wilder" <wilden1@juno.com>
To: <bostneng@FCL-US.NET>
Cc: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, March 28, 2003 9:53 AM
Subject: Re: Oil pump size differences? Boston Bob Customers?
> Doesn't it just really piss you off when people are talking about you
> rather than to you?.
> If I've got a question for Bob or any other vendor I either pick up the
> phone and call or send an E mail addressing my concerns.
> I've never had vague or miss leading responses from any list vendor.
> Responses from 100 persons not building that engine are worth exactly
> nothing.
> References for a supplier or a product are a different story.
> I have personally 'Shut Deals Down' on some of my engine / parts sales
> simply because the purchasers went to the list first and got so pumped
> full of crap that I knew a new OEM VW Engine in the original shipping
> crate at $200.00 would not have made them happy.
> I hope that this will be my only rant for Fiday.
>
> Stan Wilder
> 83 Air Cooled Westfalia
>
>
> Oil pressure is influenced by lots of things the viscosity and
> temperature of the oil the clearances of the rod and main bearings to the
> crankshaft journals the fit of the oil pump to the case and the thickness
> of the gasket between the pump and the pump cover. One of the oil
> pressure problems people have experienced when they buy a rebuilt or
> reassembled engine is with the new after market oil pumps. These new
> pumps don't fit as tight in the case and the pressure loss at oil pump
> bore in the case and the pump body can be significant. All WBX gasket
> sets I have seen include a gasket for the pump cover that measures
> .006ths. The part number for these gaskets is the same as the old bug
> gaskets those have always measured .004ths.that extra 002ths can cost
> allot of oil pressure when the oil is hot.
>
> ________________________________________________________________
> Sign Up for Juno Platinum Internet Access Today
> Only $9.95 per month!
> Visit www.juno.com
>
|
Back to: Top of message | Previous page | Main VANAGON page
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives
@ gerry.vanagon.com
The vanagon mailing list archives are copyright (c)
1994-2011, and may not be reproduced without the
express written permission of the list administrators.
Posting messages to this mailing list grants
a license to the mailing list administrators to reproduce
the message in a compilation, either printed or electronic.
All compilations will be not-for-profit, with any excess
proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively
towards the management and operation of the Vanagon mailing
list and vanagon mailing list web site.