Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2003, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 23 Mar 2003 00:41:09 -0800
Reply-To:     Richard Brassaw <sendmeanemail@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Richard Brassaw <sendmeanemail@EARTHLINK.NET>
Subject:      Re: Mobil 1 Gear Oil - Can I use this?
In-Reply-To:  <20030323065626.41104.qmail@web21105.mail.yahoo.com>
Content-Type: text/plain; charset="us-ascii"

Here is some more information that comes to the same conclusion.

What happens if API GL-5 gear oil is used in an API GL-4 gear oil application... ? API GL-4 and API GL-5 products typically use the same extreme pressure (EP) additive system, with the API GL-5 having about twice the concentration of a API GL-4. In service, these additives become active under extreme load and temperature when the protective oil film can be squeezed away. EP additives work by forming wear-resistant compounds with the metal of the gear tooth surface. As the gears mesh, these compounds shield the gear teeth from direct metal-to-metal contact that would cause wear and damage to the gears. If too little of the active additive is present, proper protection would be compromised. Too much of this additive could cause excessive chemical corrosion of the gear surface. If an API GL-5 gear oil is used in a application where API GL-4 gear oil is called for, chemical corrosion of "yellow metal" components may occur, such as bronze synchronizers, brass bushings, etc. This may lead to shifting difficulties or shortened equipment life.

The above can be found at: http://www.penten.com/faq/faq.htm#What%20happens%20if%20API%20GL-5%20gea r%20oil%20is%20used%20in%20an%20API%20GL-4%20gear%20oil%20application...

Richard

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Zoran Mladen Sent: Saturday, March 22, 2003 10:56 PM To: vanagon@GERRY.VANAGON.COM Subject: Mobil 1 Gear Oil - Can I use this?

So I picked up some Mobil 1 Gear Oil tonight with plans of putting it in an 87 Syncro. The bottle simply says exceeds GL-5 standards. Being that we need GL-4 in our trannies, can I use this?

Z

__________________________________________________ Do you Yahoo!? Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! http://platinum.yahoo.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.