john Runberg <jrunberg@MAC.COM> wrote: I'll need to support the engine to remove the tranny, right? -------------------- Clip --------------------- I hope I'm not coming back too late on this. Loosen the rear motor mount crossbar, I use 3" bolts to replace the OEM short bolts, just drop them 3" and let the engine hang loose on the longer bolts. If you drop the angled weight of the engine and tranny on the motor mounts you'll ruin them. So many little tips and tricks but I'm hoping to save you some of the hard learned lessons that have cost me money . Stan Wilder ________________________________________________________________ Sign Up for Juno Platinum Internet Access Today Only $9.95 per month! Visit www.juno.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.