"inspect the release shaft for wear on the curves areas where the release bearing rides" Lets assume you find warn parts. What is the best source for these? I know I'll need them this summer. Thanks Eric mark drillock wrote: > Just changing the manual tranny on a 2wd takes me maybe 3 hours. Did 2 > in my driveway in the last couple weeks. Naturally, there are several > things you should do along the way and this will add some time. Always > change the seal on the tranny input shaft and inspect the release shaft > for wear on the curves areas where the release bearing rides. Also it is > easier to drain the tranny when it is out so it is a good time to drain > it and check to see what comes out and what is stuck to the magnet. > > Syncro trannys are a whole other thing. Doing one of those today. Did a > couple others in the last few months. We did Karl Mullendore's Syncro in > my driveway last month. More of an all day job on those. > > Mark > > Doug Alcock wrote: > > > > Hi gang, > > > > How long should it take a good mechanic to swap manual > > transmissions in an '84?? > > > > Thanks, > > Doug |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.