Date:         Sat, 29 Mar 2003 03:41:43 EST
Reply-To:     BenTbtstr8@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ben T <BenTbtstr8@AOL.COM>
Subject:      Re: flip out side tables...
Comments: To: JordanVw@aol.com
Content-Type: text/plain; charset="US-ASCII"

In a message dated 3/28/03 10:01:15 AM Pacific Standard Time,
JordanVw@AOL.COM writes:

<< the grey flip out side table came on the wolfsburgs and carats '87 on up.
 (also on the poptop multivans and the '85-87 westy weekenders (tan) but that
 panel wont work w/ the weekender back seat, only with the wood framed westy
 full width seat)
 AT ANY RATE...   if you want to use the flip out side table, you have to use
 the plastic side panels. and if you want to use the plastic sidepanels, you
 have to use the wolfsburg/carat rear sofabed.  why? because the sofabed is
 about 2" narrower to accomodate the sidepanels sticking out from the walls.
 so basically if you want the table you need to change your whole interior in
 the back. >>

Chris,

If you will recall, Dan Danrich from Maui installed the side table with the
cut out version of the stock velour side panel. The only catch is the table
has to be in the full upright position for him to use the bed/bench. Looks
stock when down though.

BenT