Hello folks, I have a set of 15" X 6" BBS wheels from an Audi Quattro Turbo in the correct bolt pattern for the Vanagons and Syncros. The offset is ET45. So you may need thin spacers depending on what vehicle you want to use them on. Centerbores will need some clearancing unless thicker spacers are used. Normal wear and tear. Pmail me for PICS to see condition. As in any alloy installation onto a steel wheel equipped van, you will need different lugnuts and bolts. I can hook you up with that if need them. Centercaps are included but have Audi emblems and are in poor condition. Not really usable if you are not using spacers. They come with tires 205/60/15 but they are pretty worn. Three have limited usable life but one has cords showing. Tires can be removed for cheaper shipping at Buyer's expense. Shipping is also Buyer's expense, just to clarify that. Local pickup is always welcome. If no takers by 04/06/03 they are going up on ebay with a reserve of $300. BenT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.