> In a message dated 4/4/03 4:20:24 PM Eastern Standard Time, AlanCote@AOL.COM > writes: > > > > I've got a leaky power steering line (hi pressure side). The low pressure > > side looks manky too. > I replaced the rearmost sections of mine a few years ago, from the fuel pump area back, since they rusted through. I was worried about pressure, and had a hydraulic shop fabricate the hi press line from steel, and weld the original ends back on, as they didn't have the right size. They gave me hydraulic hose for the return line, but I recall seeing the rating as somewhat higher than the output spec of the pump, so it could be possible to use hydraulic hose for both supply and return. Anyone know for sure? Shawn Wright, I.T. Manager Shawnigan Lake School swright@SLS.bc.ca http://Zuiko.sls.bc.ca/swright http://www.sls.bc.ca |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.