Jeff Stewart wrote: > I've already started studying my Bentley manual on adjusting the accel. cable and kickdown lever, but any advice would be helpful! Thanks, Jeff After that you might want to pull out the governor and check that its mechanical parts move OK and that it isn't plugged by dirt or lint. If there is no improvement, I'd probably drop the pan and pull out the valve body. Clean and degunk all the valves and springs, but don't get them mixed up! ;-) Larry A. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.