http://members.aol.com/Fkc43/sales.htm">
Vanagon Items Forsale</A> webpages where you will find information about a
complete stainless steel system. Very straight forward to install as all
parts are made to OEM dimensions. You do need to make sure the bolts and
studs on the motor holding header pipes to the heads are in good to excellent
condition otherwise the threads and or studs/bolts need to be replaced. If
you need to do this I advise you to install Helicoils in the heads and use
all stainless mounting hardware. All mating surfaces on the heads must be
flat & clean and use new gaskets with Loctite Ultra Copper High Temp Silicone
Sealant on both sides. Metal side of the gasket goes toward the head.
Complete stainless steel system including DANSK header pipes, cast iron
collector, STEBRO/Vanagon J-pipe, EMICO CAT, BOSCH OXY sensor, STEBRO/Vanagon
muffler w/tail pipe & mounting brackets, all gaskets and all stainless steel
hardware is $1756 CND ~ $1225 USD plus $50 shipping to any continental USA
location. Vanagon List member discount of 5%. You MUST ask for it when
ordering.
Cheers
Frank Condelli
Almonte, Ontario, Canada
<A HREF="http://members.aol.com/BusFusion/bfhome.htm">BusFusion</A> a VW Camper camping event, Almonte, ON, June 12 ~ 15, 2003
'87 Westy & Lionel Trains
Member: <A HREF="http://www.vanagon.com/">Vanagon List</A>, <A HREF="http://www.bcn.net/~limbo/">LiMBO</A>, <A HREF="http://www.westfalia.qc.ca/">IWCCC</A> & <A HREF="http://www.ccvwc.ca/">CCVWC</A>
Vanagon/Vanagon Westfalia Service in the Ottawa Valley
<A HREF="http://members.aol.com/Fkc43/stebro.htm">STEBRO/Vanagon Stainless Steel Mufflers</A>
<A HREF="http://members.aol.com/Fkc43/busindex.html">Frank Condelli & Associates</A> or http://frankcondelli.com
