GP 18 is just to the drivers side of the block. Look where the head attaches to the block on the top of the engine. There is a thin coolant pipe running parallel to the gasket, and you should see a brown wire with an eyelet bolted to the head closer to the rear. I used a bright trouble light to find mine, but I still had to remove the intake runners to get enough access to clean the eyelet and bolt it down. Good luck, John Haddad |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.