Date:         Sat, 19 Apr 2003 23:52:48 -0400
Reply-To:     EMZ <vw4x4@FYI.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         EMZ <vw4x4@FYI.NET>
Subject:      Re: How to Keep Cool in Your Vanagon
Comments: To: Bob Stevens <mtbiker62@HOTMAIL.COM>
In-Reply-To:  <BAY2-F12J4XtliS01qC00001508@hotmail.com>
Content-Type: TEXT/PLAIN; charset=US-ASCII

Bob,
    Ifact they do pull off. Be very careful not to break them. Grab
them not by the knob but the inner part of the lever.  They will
come off.

            Eric                   86-VW4x4
            vw4x4@fyi.net          86-SS Syncro
            Pittsburgh, PA USA     1936-Chrysler
                                   92-Jetta GWC
            www.fyi.net/~vw4x4/vw4x4.htm

On Sat, 19 Apr 2003, Bob Stevens wrote:

> I was just in that part of the dash. Pried off the plastic plate to replace
> the heater fan switch. Noticed the plate could not be taken off as the knobs
> on the sliding heater/fresh-air/directional levers, are part of the sliders
> and do not pull off. Is the access thru the ash tray? Or pull off the
> plastic panel below the dash, in fron of the shifter?
>
> Bob
>
>
>
> Bob,
>
> Right cable, wrong end.  The adjustment is done at the other end of the
> cable
> where it is clamped to the heater control panel.
>
> George
>
>
> _________________________________________________________________
> Add photos to your e-mail with MSN 8. Get 2 months FREE*.
> http://join.msn.com/?page=features/featuredemail
>