That is the procedure for changing the ignition SWITCH. He asked how to change the LOCK without changing the switch. Completely different part. The lock goes in from above, the switch from below. Bentley page 94.4 shows what must be done to get the lock cylinder out. Mark Bob Stevens wrote: > > A procedure for changing the ignition lock: > > This came to me from Daniel Danrich. > > All you need to remove is [in this order]; > 1. ignition key from switch; > ................................... > >........ > > Anyone have an idea as to the cost, > > difficulty, and time, of a lock switch. Easiest and least expensive way > > is best of course i.e. can the lock cylinders be replaced without changing > > the door handles and the ignition switch. > > > > I'm suspecting the ignition is a PIA and pricey :( > > TIA > > Jeff > > 83.5 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.