|
Hi Bill We're putting a Tiico in our 87 Westy next week. The corrosion on the engine is so bad, that between it, the knocking up the mountain passes <BANG BANG>, and the oil buzzer <BZZZZ!> ....we'd had enough! We've heard of a lot of fuel rail issues, since the jetta engine wasn't designed for vanagon injectors, and decided to go with a complete new Jetta fuel rail with jetta injectors and a new pressure regulator from VanAgain. http://vanagain.com/ We've printed off all the tiico instructions, as well as photos... and feel like we're just about ready. We ordered the OBDTool for initial setup, now we just need to find a timing light with a dial advance on it. The carport is cleaned, the tiico should be delivered on Tuesday. We'll start tear out tomarrow. It's so exciting! Any words of wisdom or some "watch out for...." that you can or other list members can think of? Thanks! Glen & Ri 1987 Westfalia 1967 SingleCab |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.