<snip> > Looked over at the coil and saw ignition >sparks coming out of the rubber boot on the coil to distributor wire. This >morning on start up just before it got light I looked back there and it was >really sparking pretty bright and I could see it sparking in the wire in >places near the distributor. I'd start with a new set of plug wires. I'd guess you've got one or more open ones and the spark is looking for another way to ground. If you have an ohmmeter, check the resistance of each plug wire (including the coil wire) Anything more than 15K ohms is probably too much. Steve |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.