Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2003, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 28 Apr 2003 15:09:42 EDT
Reply-To:     THX0001@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         George Goff <THX0001@AOL.COM>
Subject:      Re: Bus Depot OXS Dilemma; Where Is the Truth?
Comments: To: kenwilfy@comcast.net
Content-Type: text/plain; charset="US-ASCII"

In a message dated 4/28/03 2:14:58 PM, kenwilfy@comcast.net writes:

<< The simple truth is that if George were so concerned about which sensor was right he would simply buy the 13931 and not have this problem. I know it is $120 but it is the right one according to Bosch so what is the problem? >>

Maybe simpleton is apt. If Ken had used more than one eye to read my posting he would know that the only reason I did not buy the 13931 as specified in the current Bosch applications book, was because my parts guy did not have one in stock. But he has ordered the correct one for me which will be here tomorrow morning for a grand total of $95. I certainly don't have a problem with that.

As I've been telling you people, search out a VW specialist in you area. Nearly every town has one which has been in business for 30 years. Get to know the owner and buy your stuff from him. If your good to him, he'll treat you right and you won't be spending more money waiting long periods of time for some unknown quantity to arrive in the big brown truck. More importantly, should there be a problem, you can get it resolved immediately. You already know that the Bosch 13931 OXS is costing me $95, as a further example, here are the TOTAL cost of some parts which I recently purchased:

Set of 3 fan belts, Contitech (Made in Germany) - $18.00 Clutch master and slave cylinders, FAG (made in Germany) - $39.00/cylinder Heavy duty Sachs hatch strut - $15.00 Syncro front wheel bearings, FAG (again, MADE IN GERMANY) - $63.00/brg.

. . . and the list goes on.

Believe me, seek and ye shall find.

George


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.