Date:         Fri, 25 Apr 2003 19:28:11 EDT
Reply-To:     Jeanon@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Sidney White <Jeanon@AOL.COM>
Subject:      Hall Sensor TEst 2.1L
Content-Type: text/plain; charset="US-ASCII"

On Digifant the Bentley test #  28.43 refers to using a US1115 voltmeter( not
a multimeter). The test says if LED flickers, hall sender is OK. What is a
US1115 Voltmeter and what can be used instead. I used a multimeter but dont
know what results I should get. I already put in a used replacement hall
sender and am testing it to be sure it is good, if it is bad then I need a
ECU as the test #28.44 failed and I do not get 4.5volts, I get zero volts- on
the other hand maybe I won't if the hall sender is bad. Sooo, that is why I
need to insure hall sender is good, ECU's might be expensive and dont want to
buy one unnecessarily.

What say you?

Sidney in New Orleans