Date:         Sun, 27 Apr 2003 09:55:52 -0500
Reply-To:     Blake Thornton <blake@MATH.WUSTL.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Blake Thornton <blake@MATH.WUSTL.EDU>
Subject:      Clutch parts
Content-Type: TEXT/PLAIN; charset=US-ASCII

OK, I am gathering parts needed to do my clutch and have some questions.

- Clutch Kit.  No problems here, I'll order a kit.

- Main Seal: I don't know what part number this is?

- Flywheel O-ring - Again, part number or size.  This (I think) is the
O-ring right next to the main seal and next to the flywheel.

- Bolts.  It seems the bolts that hook up the flywheel should be replaced,
but I would like to know what size so I can get these before starting on
the project.  Anyone know?

- Bearings.  There are some bearings shown in the Bentley (needle
bearings) near the flywheel.  Should I replace these?  If so, do you know
the part numbers?

- Other things such as: Manual Transmission Gasket, Manual Transmission
Main Input Shaft Seal, Anything I'm missing?

thanks for any help!!
Blake
84 Westy
St Louis