Hi Chris,Yes old ... really old oil could cause the buzzer to turn on but my guess is an electrical problem.I just diagnosed and repaired the wire that goes to the rear high-pressure switch on my 2.1L. The wire was cut in several places and touching the engine, causing a short. When this switch shorts out the buzzer and blinking light goes on. Check out the wiring on this switch between the Water pump pulley and the crank pulley. Good Luck,Joel89 Syncro Westy JordanVw@AOL.COM wrote:can old oil be a cause of making the oil pressure warning light and buzzer come on on the 2.1L?? oil level fine, no leaks. any idea why whe light and buzzer would come on? thanks chris --------------------------------- Do you Yahoo!? The New Yahoo! Search - Faster. Easier. Bingo. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.