""But what happens when switching between the other modes?"" There must be a way to hook up the switch to a light (or meter) and a power source and see if it does it. Battery power to inputs, output to a grounded light. Slowly turn the switch and see if it flickers. I'll bet that if the 'both' position is located between the Batt1 and Batt2, it will be make before break. An 'overlapping' of the contacts. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.