Yep, that wire is the one that carries the hall sensor data to the ECU. The ECU won't fire the injectors unless it thinks the engine is turning. The hall pulses are how it knows. Mark Daniel Brideau wrote: > > Thank you all very much for your help with my injector power problem. > > The culprit was a loose wire inside a block connector. > > http://www.myghia.com/2411659348/loose_pin.jpg > > Your help is priceless, > > Dan Brideau |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.