Date:         Fri, 2 May 2003 22:27:39 -0400
Reply-To:     Robert Donalds <bostneng@FCL-US.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Donalds <bostneng@FCL-US.NET>
Subject:      Re: Digifant stock timing = poor performance?
Comments: cc: jgh3rd@MINDSPRING.COM
Content-Type: text/plain; charset="iso-8859-1"

Fellow vanagon types 
Setting the timing its done at an idle. line up the case seem with the notch on the pulley done. If the Timing mark moves around as you attempt to do this than the throttle switch is not working correctly so the ECU does not know that the engine is at an idle.
Bob Donalds
Http://www.bostonengine.com

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.