I concur with Loren - I have also heard many times that the Boxer water pump is very sensitive to belt over tightening - which will cause a bearing failure [ one way to get coolant out the vent hole..] I keep my belt just tight enough to keep it from squeaking.
Tom 90 Westy -----Original Message----- From: Loren A. Busch [mailto:lbusch@IX.NETCOM.COM] Sent: Tuesday, May 13, 2003 1:59 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: water pump #4 in a year, vent hole leak
One thing that has not been mentioned is belt tension. If the belt is to tight the stress can take out a bearing or seal on a waterpump. Don't ask me how I know.... |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.