Date:         Mon, 12 May 2003 13:20:13 -0400
Reply-To:     Karl Wolz <wolzphoto@WORLDNET.ATT.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Karl Wolz <wolzphoto@WORLDNET.ATT.NET>
Subject:      Re: KYB Jelly

You gotta get yourself to a wrecking yard and pick up the origianl bushing
AND the original top bushing cap.  The bushings are thicker and stiffer and
the metal caps are much thicker and stiffer.  If you do any off roading at
all (or even hit the occasionial "traffic calming device"), the KYB
mounting plates will bend and allow too much movement of the mount.

Mine were actually turned inside out when I pulled them!

Karl Wolz

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.