Date:         Wed, 14 May 2003 10:55:13 -0400
Reply-To:     Tim Demarest <tim.demarest@POBOX.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tim Demarest <tim.demarest@POBOX.COM>
Subject:      Re: Test for AFM?
Comments: To: Jay L Snyder <Jay.L.Snyder@USA.DUPONT.COM>
In-Reply-To:  <OF89D584C6.DD2EDF5F-ON85256D26.004EE07B@lvs.dupont.com>
Content-type: text/plain; charset=us-ascii; format=flowed

Hey, I have exactly that symptom in my van! Thanks for the tip on where to
look!

Tim

At 10:26 AM 5/14/2003 -0400, Jay L Snyder wrote:
>After replacing my AFM a few years back, the first thing I noticed was how
>I could now hold the engine rpm at whatever speed I chose.  Before the
>swap, there were speeds that the engine would not "sit" on.  So, I am
>saying a good test of your AFM would be to raise the rpms from idle to
>2500 and see if you can hold it steady at random engine speeds.
>
>
>                         Jay
>
>
>
>This communication is for use by the intended recipient and contains
>information that may be privileged, confidential or copyrighted under
>applicable law.  If you are not the intended recipient, you are hereby
>formally notified that any use, copying or distribution of this e-mail,
>in whole or in part, is strictly prohibited.  Please notify the sender
>by return e-mail and delete this e-mail from your system.  Unless
>explicitly and conspicuously designated as "E-Contract Intended",
>this e-mail does not constitute a contract offer, a contract amendment,
>or an acceptance of a contract offer.  This e-mail does not constitute
>a consent to the use of sender's contact information for direct marketing
>purposes or for transfers of data to third parties.
>
>  Francais Deutsch Italiano  Espanol  Portugues  Japanese  Chinese  Korean
>
>             http://www.DuPont.com/corp/email_disclaimer.html