Date:         Wed, 14 May 2003 10:17:31 -0700
Reply-To:     fortinoj@SPEAKEASY.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Joseph Fortino <fortinoj@SPEAKEASY.NET>
Subject:      Re: CV Joints ( rear )
Comments: To: Zoran Mladen <zmaninco@YAHOO.COM>
Content-Type: text/plain

you know my lobro cv kit did'nt have the washers? i was
ok new star heads but no washers??

On 14 May 2003, Zoran Mladen wrote:

> Joe,
>
> Do you have lock washers on your bolts? It
> sounds like you do not. The original type are
> very thin with ridged sides. If these are
> missing or worn smooth, you should install new
> lock washers and retorque. This should prevent
> the loosening.
>
> Z
>
> --- Joseph Fortino
> <fortinoj@SPEAKEASY.NET> wrote:
> > looks like my CV joint screws like to come
> > loose found 1 just hangin out again, they
> > are the new star type. BTW I make it a point
> > to always check them think my CV joints are
> > almost the most serviced part these days..
> > hehe don't want to smoke a joint or drop the
> > joint. ahhhhhhh ;)
> >
> > Joe
>
>
> __________________________________
> Do you Yahoo!? The New Yahoo! Search - Faster.
> Easier. Bingo. http://search.yahoo.com