Date: Tue, 20 May 2003 15:41:09 +0000
Reply-To: fortinoj@SPEAKEASY.NET
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Joseph Fortino <fortinoj@SPEAKEASY.NET>
Subject: Re: AFM tracks
Content-Type: text/plain; charset="iso-8859-1"
I have'nt tried anything as of yet still running it after just cleaning
it, but I do notice that while drive at semi high idle like 3grand tacking
it will do a little hopping a bit and the smooth-ness is not their. THIS has
to be the AFM also I think a worn AFM will cause a little jump in idle.
if i'm wrong thats ok still learning this monster. ;)
thanks everyone your help means alot to me and others.
Joe
> -----Original Message-----
> From: Mike Collum [mailto:collum@MFX.NET]
> Sent: Tuesday, May 20, 2003 02:55 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: AFM tracks
>
> You can take out the screws that hold the plate with the track on it and
> elongate the holes slightly. Then reinsert the screws and tighten it
> down with the plate offset just a tad. The wiper then has a "New"
> surface to run on.
>
> Mike
>
> ----- Original Message -----
> From: "Mark Dorm" <mark_hb@HOTMAIL.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Tuesday, May 20, 2003 3:02 AM
> Subject: Re: AFM tracks
>
>
> > david, you don't say what your opinion is of what and whether to do
> anything
> > about this... should we move it from this oscillating position at
> idle,
> > couldn't we have problems if we just arbitrarily move it around...
> >
> >
> > >From: David Beierl <dbeierl@ATTGLOBAL.NET>
> >
> > >
> > >At 11:22 AM 5/16/2003, Joseph Fortino wrote:
> > >>Hello,
> > >>
> > >>does anyone know if the tracks on the airflow meter inside the unit
> > >>show signs of wear near where the unit rests, seems my tracks look
> > >>worn out only at one spot. I cleaned the tracks lightly last night
> > >>other than that all looks ok. *it might be draging ? * or sticking
> eh?
> > >>any info for those who have popped the lid on this little device :)
> > >
> > >Watch it while it's idling -- you'll see it oscillating right at that
> spot,
> > >which gets enormously more travel and wear than the rest of the range
> where
> > >it simply moves from one spot to another and stays there until
> conditions
> > >change.
> > >
> > >david
> > >
> > >
> > >>thanks
> > >>Joe
> > >
> > >--
> > >David Beierl -- dbeierl@attglobal.net
> >
> > _________________________________________________________________
> > MSN 8 with e-mail virus protection service: 2 months FREE*
> > http://join.msn.com/?page=features/virus
> >
>
|