Hi Jeff, Have a look at: http://volksweb.relitech.com/uballjnt.htm for the details. Have fun, TomC > -----Original Message----- > From: Jeff Stewart [SMTP:fonman4277@EARTHLINK.NET] > Sent: Wednesday, May 21, 2003 9:53 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Upper Ball Joint Replacement > > Hey Folks, > I need to replace the upper ball joints on my '84 Westy. Bentley > doesn't really say a whole lot about this procedure, basically a picture > showing a VW tool, 267 I believe. I'd appreciate hearing from any folks > who've done this themselves-is the VW tool really needed or can something > else do the job just as well? Any advice would be helpful. TIA, Jeff |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.