Date:         Sat, 17 May 2003 06:19:07 -0600
Reply-To:     John Rodgers <j_rodgers@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <j_rodgers@CHARTER.NET>
Subject:      List Sticker Production Progress
Content-Type: text/plain; charset=us-ascii; format=flowed

I am continuing the effort to get some list stickers made up, using the
equipment and materials available to me. The type of sticker that I can
produce is controlled by the fact that with my process they are cut-outs
that stick on rather than the  "static cling" types, which are a printed
type sticker. My process does not use printed materials, and once stuck
on, they are not movable.They are made from signmakers vinyl, are
mounted externally, and can be fairly easily removed, but to do so will
probably destroy the sticker.

I can make these in a larger size - same as the original stickers -
about a 4 x 6 or 5 x7 size  for rear glass somewhere - back or sides.
And I can make a smaller size, for the windshield. Best position there
will be the lower left of the windshield (driver side).

Again, I emphasize that these go on the outside of the glass, not
inside. I have one on the left rear glass of my van and it has been
there three years with no problems.

Due to the way I have to run the machine, it appears at this time that
the stickers I make will be both as singles for the rear glass,  and as
pairs - right hand/left hand for mounting on the side glass.

I need to hear it from the list what interest there is in sets of the
right/left pairs.

I haven't got the price nailed yet. Working on it. Should be able to
announce next week.

John Rodgers
88 GL Driver
Birmingham, AL