Date:         Tue, 20 May 2003 14:32:59 -0700
Reply-To:     Jeff K <kennedy@THERIVER.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeff K <kennedy@THERIVER.COM>
Subject:      turn signals don't work
Content-Type: text/plain; charset="Windows-1252"

Well, after gettin the wiring hooked up for my diff lock, I seem to have created a problem - the turn signals don't work. The light on the dash emits a constant dim glow, and goes bright when the signal lever is moved, but doesn't flash, and the bulbs on the outside of the van don't light. Hazards work fine. I'm guessing the circuit has a poor ground, so that no enough current is flowing to activate the flasher relay. Any suggestions on where to start, and save me hours of wire tracing? 

Thanks,
 Jeff
84 westy tiico

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.