Date:         Wed, 21 May 2003 15:14:39 -0400
Reply-To:     vw4x4@FYI.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Zeno <vw4x4@FYI.NET>
Subject:      Syncro = 2WD conversion
Comments: To: "Syncro@yahoogroups.com" <Syncro@yahoogroups.com>
Content-Type: text/plain; charset=us-ascii

Here is a question for the few that have converted
a 2WD Vanagon to a Syncro:
             The Frame section in a 2WD Vanagon
just in front of the transmission is straight
and flat. In the Syncro it has a hump in it. What was
done to this,  to convert to a Syncro setup?

                                              Eric

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.