Date:         Wed, 21 May 2003 22:14:34 -0400
Reply-To:     "Carrington, Tom" <TCarrington@RELITECH.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Carrington, Tom" <TCarrington@RELITECH.COM>
Subject:      Re: Upper Ball Joint Replacement
Comments: To: Jeff Stewart <fonman4277@EARTHLINK.NET>
Content-Type: text/plain

Hi Jeff,

Have a look at:

http://volksweb.relitech.com/uballjnt.htm

for the details.

Have fun,
TomC

> -----Original Message-----
> From: Jeff Stewart [SMTP:fonman4277@EARTHLINK.NET]
> Sent: Wednesday, May 21, 2003 9:53 PM
> To:   vanagon@GERRY.VANAGON.COM
> Subject:      Upper Ball Joint Replacement
>
> Hey Folks,
>      I need to replace the upper ball joints on my '84 Westy. Bentley
> doesn't really say a whole lot about this procedure, basically a picture
> showing a VW tool, 267 I believe. I'd appreciate hearing from any folks
> who've done this themselves-is the VW tool really needed or can something
> else do the job just as well? Any advice would be helpful.   TIA,  Jeff