Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2003, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 22 May 2003 07:17:03 -0700
Reply-To:     Shawn Wright <swright@ZUIKO.SLS.BC.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Shawn Wright <swright@ZUIKO.SLS.BC.CA>
Subject:      Re: [Syncro] Rusty power steering lines
In-Reply-To:  <BAY4-DAV155Sj7wgCfJ0000e858@hotmail.com>
Content-type: text/plain; charset=US-ASCII

That's what I did with the rear half section on my '88, from pump to mid van area. A local hydraulic shop matched the bent pipe, then welded my old ends on for around $60 if I recall, including a section of flexible hydraulic hose to replace the return line. This was 4 years ago, no problems yet.

On 22 May 2003 at 7:35, Vanagon man wrote:

> If you have the old tubes off, any hydraulic hose shop should be able to > either braze your old fittings to the new tubing, or be able to come up with > something.Those guys generally are pretty creative for they are fixing problems > on a large variety of heavy equipment, some very old.......... > > ----- Original Message ----- > From: "Eric Zeno" <vw4x4@FYI.NET> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Thursday, May 22, 2003 7:02 AM > Subject: Re: [Syncro] Rusty power steering lines > > > > THe best solution I've come up with is making up your own > > out of 1/2" and 3/8" brake tubing. This requires cutting > > off the existing tubing ends and welding them on to the > > new tubing. Bending 1/2" tubing, like the factory, is a tough > > job, THe welding has to be done very precisely also, so > > this fix is not for the shade tree mechanic. > > Eric > > > > Westyman wrote: > > > > > I need a set of power steering pipes for a customer's van that I am > working > > > on, they are very rusty and I don't trust them. Is there any other good > > > solution other than Frank Condelli's kit? Thanks. > > > > > > Karl > > > > > > If you would like to modify your subscription settings (including > unsubscribing), visit: > > > http://groups.yahoo.com/group/Syncro > > > Please remember that rude or offensive language is not allowed on the > Syncro list. Please try your best to resolve differences privately and keep them > off the list. > > > > > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > >

-- Shawn Wright http://Zuiko.sls.bc.ca/swright { This message sent by Pegasus Mail, guaranteed virus-free } { Try it at http://www.pmail.com }


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.