Date:         Sat, 24 May 2003 18:30:44 -0400
Reply-To:     john Runberg <jrunberg@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         john Runberg <jrunberg@MAC.COM>
Subject:      Re: HELP : Window regulator trouble
Comments: To: chassehsd@EARTHLINK.NET
Content-type: text/plain; charset="US-ASCII"

Had a similar problem where the window was in the wrong position to remove
it from the vehicle. First time I used a open end wrench and lost of cussing
to get it where I wanted it. Second time I got smart.

Go find yourself a wide-blade flat screwdriver. Remove the motor from the
regulator (it was a tight fit w/ the ratchet, but not too difficult) and
then insert screwdriver and turn. If your regulator is in good shape it'll
turn really easy.

Works like a charm.

John


> 91 Carat w/ electric windows
> passanger side window is stuck in the full down position
>
> Got a replacement regulator and motor from vanagain.com (great to deal
> with)
>
> PROBLEM:
> The haynes manual says to put the window into the up position and remove
> the two bolts that hold it to the regulator
> BUT my window is STUCK FULLY DOWN AND WILL NOT RESPOND TO THE SWITCH AT
> ALL.
> When I manualy try to (dare I say) force it, it feels REALLY stuck.
> Afraid of breaking the window, not to mention the damage to my hands,
> BUT I can't get to the bolts holding the window to the regulator without
> getting it up further.
>
> Any suggestions?
>
> NOTE. when I push the down switch the motor jimmies a bit so I figure it
> is still alive
> but when I try the up position the motor just sits there dead as a door
> nail.
>
>
> Thanx for any help
> Joe
>
> oh yeah I forgot to mention that it has been raining all week in
> Virginia. LOL :(