Date:         Tue, 27 May 2003 06:35:20 +0000
Reply-To:     Chris DeLong <green536@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Chris DeLong <green536@HOTMAIL.COM>
Subject:      Re: Brake problem
Comments: To: jbrschawn@EARTHLINK.NET
Content-Type: text/plain; format=flowed

Bench bleeding is not so necessary and I doubt it killed a new MC. I would
check the condition of your rear brakes. It has been know for slave
cylinders to bleed air into the system. Although you didnt mention if you
had been getting air when you were bleeding the brakes; if you were then you
might have another problem.


Chris DeLong
Fine Tuning
206.367.5503
www.finetuningperformance.com
Seattle, WA USA





>From: Jere Hawn <jbrschawn@EARTHLINK.NET>
>Reply-To: Jere Hawn <jbrschawn@EARTHLINK.NET>
>To: vanagon@GERRY.VANAGON.COM
>Subject: Brake problem
>Date: Mon, 26 May 2003 21:36:31 -0700
>
>Hi All,
>
>
>
>Can anyone provide some assistance on this brake problem?
>
>
>
>My pedal fades very very slowly.  So I change the master cylinder and I've
>bled the system from the furthest brake forward no change.  I spoke with a
>local car mechanic and he said that the cups in the cylinder have reverses
>themselves because I did not bench bleed the new master cylinder.  He
>couldn't explain why there was no change from the original master cylinder.
>I checked for leaks: none.
>
>
>
>TIA
>
>Jere
>
>90 GL
>
>88 GL

_________________________________________________________________
STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail