Date:         Fri, 30 May 2003 10:01:25 -0700
Reply-To:     Matthew Pollard <poll7356@UIDAHO.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Matthew Pollard <poll7356@UIDAHO.EDU>
Subject:      Re: [WetWesties] O2 sensor
Comments: To: Pat Callaghan <patcal@cybcon.com>
Comments: cc: wetwesties@yahoogroups.com
In-Reply-To:  <000501c326c9$1f405e60$98d0bbd0@home>
Content-type: TEXT/PLAIN; charset=US-ASCII

the two wires that look the same are the heater wires. The odd-ball wire
is the signal wire.

Matthew Pollard          "Racing with the wind and flirting with death
Dept. Of Chemistry        So have a cup of coffee and catch your breath"
University of Idaho
www.uidaho.edu/~poll7356



On Fri, 30 May 2003, Pat Callaghan wrote:

> Hi all,
>
>      I am replacing my O2 sensor with the Bosch #13913 today.  I will splice
> the wires but want to make sure that the order of the two black wire do not
> matter.  They are for the heater whereas the white one goes to the computer.
> Is this correct?  Thanks.
>
> Pat Callaghan
> 87 GL Westy
> Portland, OR.
> www.cybcon.com/~patcal
>
>
>
> To help support WetWesties, please buy your books through the WetWesties Bookstore. Just follow this link:http://www.clubvw.corvallis.or.us/wetwesties/books.html
> To leave us: wetwesties-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>