Hi Germain, Simply fill (coolant) the heater with a very small funnel, put this one into the bleeder screw: http://www3.sympatico.ca/huotx/engine/rear_heater_screws.jpg (white one) until it's full, using a funnel help the air make it's way out around the funnel small end. I made a adaptor that screw into the bleeder screw, at the other end of this adaptor there is a small clear hose, that hose goes into a bucket! This way i can see the air bubble and i don't make a mess. If you don't make an adaptor...well, put a rag around the bleeder. Cheers, Ben http://pages.infinit.net/eurokit/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.