Date:         Tue, 10 Jun 2003 19:29:59 -0500
Reply-To:     Jay Roth <bghuna@MCHSI.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jay Roth <bghuna@MCHSI.COM>
Subject:      Re: Addendum Re: FaUcet's water pump
Comments: To: David Beierl <dbeierl@attglobal.net>
In-Reply-To:  <5.1.0.14.2.20030610172542.054fb8d0@pop1.attglobal.net>
Content-Type: text/plain; charset="iso-8859-1"

Turns out that the pump is getting power, it's just that the PO had well
water and the hard water has left enough deposits that the fins on the pump
won't spin without some assistance to get it started. Of course, the plastic
fins are brittle that it's just falling apart too. At least the wiring is
good!

Thanks for all the advice to this new (and obviously thick-headed) Westy
owner!

Love, Light & Laughter,
Jay


-----Original Message-----
From: David Beierl [mailto:dbeierl@attglobal.net]
Sent: Tuesday, June 10, 2003 4:27 PM
To: Jay Roth
Cc: vanagon@GERRY.VANAGON.COM
Subject: Addendum Re: Facet's water pump


At 04:33 PM 6/10/2003, David Beierl wrote:
>stuff is -- make sure you're getting 12v between those terminals when
>faucet switch is on.  If so, pump no doubt died.  The original was made by

Forgot to say, check the ground before you start messing with the
pump...you need one wire at +12 and one at ground.  But you knew that...

d


--
David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"