Date:         Tue, 10 Jun 2003 21:37:33 -0400
Reply-To:     Edward Maglott <emaglott@BUNCOMBE.MAIN.NC.US>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Edward Maglott <emaglott@BUNCOMBE.MAIN.NC.US>
Subject:      Torque Converter Oil Seal
Content-Type: text/plain; charset="us-ascii"; format=flowed

Still working on my AT rebuild.  I am installing the torque converter oil
seal in the final drive housing.  Since it has been over 24 house\rs since
I removed it, I have forgotten which way it goes in.  Open side of seal
toward final drive or toward converter?  And Bentley says to dip it in ATF
and push it as far as it will go.  But it seems like I remember some
discussion on this topic.  Something about all the way in vs. just so it is
flush with the housing?

Thanks for any input.
Edward

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.