Date:         Wed, 11 Jun 2003 13:25:15 -0700
Reply-To:     wilden1@JUNO.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1@JUNO.COM>
Subject:      Re: Emisson Control unit question
Comments: To: doug.alcock@HEWITT.COM
Content-Type: text/plain; charset=us-ascii

Not a problem.
Nobody would catch on that if they hadn't had the top off a bad AFM to
find out after ten hours of parts replacements.
That picture I offered tells the whole story.

Stan

On Wed, 11 Jun 2003 13:33:48 -0400 Doug Alcock <doug.alcock@HEWITT.COM>
writes:
> I stand corrected --- by more than one of you.
>
> Thanks,
> Doug
>
> >Actually, turning on the ignition only starts the ECU. The ECU then
> runs
> >the pump for a few seconds to bring up the fuel pressure in
> anticipation
> >of engine starting. From that point on the ECU runs the pump
> whenever it
> >see pulses from the hall unit in the distributor.
>
>

________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!