Date:         Sun, 8 Jun 2003 19:01:59 -0400
Reply-To:     Vanagon Man <vgonman@MSN.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Vanagon Man <vgonman@MSN.COM>
Subject:      Re: 80-82 owners: distributor question
Comments: To: Simplstupd@AOL.COM
Content-Type: text/plain; charset="iso-8859-1"

Most likely the distributor drive gear is in the wrong position to line the
dizzy up properly............nonethe less, just figure out where TDC # 1 is
and go from there.........you can always pull the dizzy and move the gear on
the bottom of the dizzy 180 to give you a different angle.........


Adam P
81  Westy "The Brick "
70 Single Cab "Whitey"
74 Beetle "Ol Yeller"
73 Transporter (STILL at paint shop)
1988 Vanagon Wolfsburg
1976 Transporter (New CA bus)
1974 412 "Goldmember"
Used Vanagon Parts for sale (mostly aircooled)
----- Original Message -----
From: "Paul Wies" <Simplstupd@AOL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, June 08, 2003 11:46 AM
Subject: 80-82 owners: distributor question


> My 82 has an 009 installed.  I purchased a correct 205 for it and have 2
> questions:
>
> When you have the timing set at 7.5 BTDC, where is the rotor pointing?
>
> If you are looking down on the distributor, if the front of the Van would
be
> 12 o clock and the rear bumper would be 6 o'clock, where is the vac adv
> sitting at and where is the condenser sitting?
>
> My guess is the PO installed the wrong engine tin, which won't allow me to
> turn the distributor and seat it where it needs to be.
>
> Paul
>