Date:         Tue, 17 Jun 2003 19:55:17 -0700
Reply-To:     Todd Last <rubatoguy@MINDSPRING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Todd Last <rubatoguy@MINDSPRING.COM>
Subject:      Re: VDO Coolant Gauge Sender on a 2.1L....Suggestions?
Comments: To: kevin obrien <kevindobrien@YAHOO.COM>
Content-Type: text/plain; charset=us-ascii

How about drilling and tapping the unused end of the plastic coolant distribution tower in front of the firewall (above the starter) There is a natural place on the driver's side of this piece.  Or how about tapping the coolant drain hole on the passenger side of the engine - then you could get a coolant reading in the water jacket that surrounds the cylinders?

Two places I have thought of - don't know if they are wise choices or not.

Todd
'88 Westy

-------Original Message-------
From: kevin obrien <kevindobrien@YAHOO.COM>
Sent: 06/17/03 10:56 AM
To: vanagon@GERRY.VANAGON.COM
Subject: VDO Coolant Gauge Sender on a 2.1L....Suggestions?

>
> Hello All:

Well...the process of resurecting my 1990 Carat is
underway. I want to install a VDO Coolant gauge and
while the engine is being replaced I figured it was a
good time.

I posted this question awhile back and there was alot
of discussion/dissent.

Anyone found a really good place to mount the sending unit???

__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
>