Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2003, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 18 Jun 2003 23:08:22 -0400
Reply-To:     "R. Hotchkiss" <hotch@HOTSTRINGS-INC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "R. Hotchkiss" <hotch@HOTSTRINGS-INC.COM>
Subject:      Re: head repair and water pump
Comments: To: Dan Erlandson <danoer1@ECLIPSE.NET>
In-Reply-To:  <BB16944C.6CAD%danoer1@eclipse.net>
Content-type: text/plain; charset="US-ASCII"

Don't take the crank pulley off. If your allen wrench is too long, grind it down. follow the pipe to the other side of the pulley to the rubber hose. remove the hose so that you can get that pipe free to remove the pump.

I just did my 2nd pump and I did find it easier the 2nd time around.

I also attacked the big pipe hexs with a long extension and worked from underneath looking through the exhaust system.

Hotch 86 Vanagon GL 89 Jetta GL Philly Richard Hotchkiss http://www.hotstrings-inc.com

> From: Dan Erlandson <danoer1@ECLIPSE.NET> > Reply-To: Dan Erlandson <danoer1@ECLIPSE.NET> > Date: Wed, 18 Jun 2003 22:12:28 -0400 > To: vanagon@GERRY.VANAGON.COM > Subject: head repair and water pump > > OK so I am in the middle of a cylinder head job and feel foolish for even > asking the question I did the other day (do I have to remove the headers to > get the heads out? of course you do there is no other way!!!), but now as I > sit waiting for the JB Weld to set up on the minor (but enough to leak) > pitting (60k on those heads) and for the parts I ordered from Ken at > Vanagon.com (God bless him and his prompt, courteous service) to come in, I > come at last to my question of the day... How the heck do you get the water > pump out of this thing??? Those bottom two hex bolts that hold the pipe to > the passenger side of the engine are buried deep and the @#$*& crankshaft > pulley is in the way... You mean I have to disassemble the pulley? If so > how do I hold the engine/crankshaft still while undoing the big nut on the > pulley... This all makes me want an aircooled instead of my wasserleaker > > Any advice or calming words would be appreciated > > > -- > Dan Erlandson > Flemington, NJ >> danoer1@eclipse.net > 91 VW Vanagon GL 170,000 mi > 99 VW Passat 107,000 mi >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.