Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2003, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 19 Jun 2003 23:28:02 -0700
Reply-To:     wilden1@JUNO.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1@JUNO.COM>
Subject:      Re: Off topic - Aircraft Engine
Comments: To: j_rodgers@CHARTER.NET
Content-Type: text/plain; charset=us-ascii

What you've just described is what GM used in A/C compressors back in the 50s/60s as A/C pumps. Those concentric shaft are also used on many high pressure Aircraft pumps.

Stan Wilder

On Thu, 19 Jun 2003 23:03:21 -0500 John Rodgers <j_rodgers@CHARTER.NET> writes: > Hopeing some of The List's aviation types could help me out here. > > There was a FAA certified engine that had a crankshaft with a sort > of > waffle plate mounted in the center. Like the shaft went through the > center of a circular plate. The plate was waffled up and down so > that if > the plate was in a slot, and the crank turned, the plate moved > through > the slot and the waffle made the slotted peice move back and forth > . > Prol'ly not making any sense, but don't know how to describe this > thing. > Anyway, the pistons were long cylingers with a single slot in the > side. > They are what rode on the waffle plate, and they were mounted > parallel > to the crankshaft, not perpendicular. The pistons were double ended, > and > as the crank rotated, the waffle plate wobbled, and being in the > slot on > the pistons, made the pistons move back and forth. This engine had > spark > plugs at both ends, and you could shut down one bank of plugs and > save > fuel. It was water cooled as I recall, and was designed to have a > low > frontal resistance to air flow. > > I am trying to find a name for this engine, so I can research it. > Anybody have any info on this thing. A name, or a source of info, > etc. > Like I said, it was certified by the FAA for use in aircraft, but > it > never made it in the aircraft engine market. Some years ago I had > heard > that the certificate holder was looking for a partner to get this > engine > to market, so the concept was not dead, even then. > > Thanks for any help ---- and apologies for the non-Vgon band width > use. > > John Rodgers > 88 GL Driver > >

________________________________________________________________ The best thing to hit the internet in years - Juno SpeedBand! Surf the web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today!


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.