Problem : Van was overheating ( according to the gage ) and the fan would not turn on.. Tested the fan and both speeds worked fine.. Thanks Gary Hradek for the instructions on how to test the fan! I took the instrument panel off and noticed that the wiring harness that connects to the rear of my clock was only half on.. ( this was from me removing the dash and replacing the wiper motor ) pushed this all the way on and started the van and let it run until it was up to temp.. the gage now stops at the light in the middle and the fan now kicks on.. Such a simple little fix.... Thanks for all the help.. Shannon 91 Vanagon |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.