Date:         Mon, 23 Jun 2003 18:19:05 -0400
Reply-To:     Corner House Farm <cornerhouse@OLG.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Corner House Farm <cornerhouse@OLG.COM>
Subject:      Re: Need help with '91 vanagon
Content-Type: text/plain; charset=us-ascii

Hi,

THANKS for the help. I didn't realize that the grill was removable,
figured that it was welded to the housing. Got mine out by just taking
the plastic screws out above it, loosing the 6 bolts, and I was able to
slide it out the top. It was a tight fit but sure beats lowering the
unit.

The screw came out of the latch like a dream. I used a driver bit and it
did the trick.

Thanks again
michael

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.