Date:         Fri, 27 Jun 2003 21:09:28 -0600
Reply-To:     John Connolly <john@AIRCOOLED.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Connolly <john@AIRCOOLED.NET>
Subject:      Re: Oil block off adapter for WBX
Comments: To: Todd Last <Rubatoguy@MINDSPRING.COM>
Content-Type: text/plain; charset="iso-8859-1"

the stock filter and location is excellent. IMO, you should use the sandwich
adapter to run to the cooler, and retain the stock filter. We have one that
is also thermostatically controlled so the oil gets up to temp before
running to the cooler.

John
Aircooled.Net Inc.
> Does anyone know a source for a remote oil-filter adapter that will
> replace the existing oil filter and provide an inlet and outlet oil line
> that you can plump to an external oil cooler and filters?
>
>

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.