Even with a new sensor and o-ring I had a leak too. I used some plumbers tape around the threads. So far so good.
>>> John Rodgers <j_rodgers@CHARTER.NET> 6/30/2003 1:31:24 PM >>> In every instance I've expereiced the coolant around the coolant level sensor, the sensor itself had a crack in it. Give it a careful inspection using a magnifying glass. Your problem may be a crack, not an "O"- ring. John Rodgers 88 GL Driver
Lee Kouns wrote: >I'm getting coolant leakage around the coolant level sensor in my '87. >I'm guessing that I need to replace the seal (o-ring?) for the sensor. >Any suggestions on the best tool to use would be appreciated. I assume >that removal of the whole tank is not necessary. >Thanks in advance, >Lee Kouns > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.