John; I would double check the three alignments associated with the throttle body as outlined i the Bentley. Especially the idle position sensor.
----- Original Message Follows ----- > On a fairly new rebuilt 1.9 '84 digijet, installed a > rebuilt AFM. Now about 10% of the time when I decelerate > to idle, the engine stops. O2 sensor is also new, timing > is OK, no vacuum leaks. I'm guessing maybe a CO > adjustment. Any advise or suggestions? Ken Lewis 86 Transporter Crew Cab, 60 T-5 Coupe http://neksiwel.20m.com/ O2 sensor monitor, my cars, Vanagon Tech http://EB03.20m.com/ Everybus 2003 pictures To reply remove the letters "no" in the begining of my address if they appear (due to spammers). |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.