You failed on CO. Your HC is okay, so a quick take on this is that you're oxygen sensor (or the circuit from the OXS to the ECU) is your first place in inquiry. Have you plugged a computer in? I.E. Something like VagCom? This will get the readings from your ECU and give you more data to work from. I mean, it could be that you just need to change your air filter and check the contacts on OXS line.
on 7/5/03 10:16 AM, Dennis Atkins at bikeputz@HOTMAIL.COM wrote:
> Here ara the results: > > HC CO > NOx > State standard 2.20gpm 60.00 gpm 2.80 gpm > > Inspection 1.374 gpm 15.306 gpm 3.616gpm > readings > FAILED > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.