Date:         Tue, 1 Jul 2003 09:41:53 -0400
Reply-To:     Thomas Brobst <TJBROBS@ACCUSORT.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Thomas Brobst <TJBROBS@ACCUSORT.COM>
Subject:      Re: help with 91GL problem - it likes flatbed rides too much
Comments: To: tjhannink@yahoo.com
Content-Type: text/plain; charset=US-ASCII

thanks

Thomas Brobst
Accu-Sort Systems, Inc
Staff Mechanical Engineer
215-721-5061
fax 215-799-1600

If we knew what it was we were doing, it would not be called research, would it? -Albert Einstein 



>>> TJ Hannink <tjhannink@yahoo.com> 7/1/03 >>>
--- Thomas Brobst <TJBROBS@ACCUSORT.COM> wrote:
> Thanks.
> What and where is the temp2 sensor?

The temp2 sensor provides engine/coolant temperature
information to the ECU so it can provide the proper
air/fuel mixture at a given operating temperature. It
is located in the left front of the engine compartment
on the left side of the thermostat housing. A second
temperature sensor is located on the front of the
housing that connects directly to the temperature
gauge on the dashboard.

My sensor was telling the ECU that the motor was cold
even after it had been run, so when you tried to
restart, it would provide extra fuel and flood the
motor.

Good luck,




=====
TJ Hannink
Goldibox - 1987 Vanagon Camper, Wolfsburg Edition
Winter Park, Florida
http://home.earthlink.net/~tjhannink/
http://groups.yahoo.com/group/wolfsburg_campers
http://photos.yahoo.com/tjhannink [Vanagon] Album

__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com